CLUTCH PROBLEM
2 posters
Page 1 of 1
CLUTCH PROBLEM
HI all
I have just got a 650 K8 bandit it starts fine but soon as you put it in gear the bike pulls away as if the clutch is automatic, even with the lever pulled in. It will not select another gear unless the engine is turned off then it selects gears freely. I checked the fluid and it is a grey colour. Can i take it the clutch is in need of replacing or is something else afoot.
Cheers
I have just got a 650 K8 bandit it starts fine but soon as you put it in gear the bike pulls away as if the clutch is automatic, even with the lever pulled in. It will not select another gear unless the engine is turned off then it selects gears freely. I checked the fluid and it is a grey colour. Can i take it the clutch is in need of replacing or is something else afoot.
Cheers
Pheonix_rage- Posts : 1
Join date : 2015-03-29
Re: CLUTCH PROBLEM
seems like you need to change that Clutch Fliud , bleed it out and replace it with new , would be a good idea to change the engine oil as well , i find Castrol Actevo works well
samcro- Posts : 25
Join date : 2014-11-24
Age : 57
Location : South Africa
Similar topics
» fueling problem
» Cold start problem with my 600 Bandit.
» 1200s 2005 idling problem
» main beam with clutch
» are the lambda sensors a common problem on the 1250?
» Cold start problem with my 600 Bandit.
» 1200s 2005 idling problem
» main beam with clutch
» are the lambda sensors a common problem on the 1250?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|